05-26-2021 01:51 AM - edited 07-05-2021 01:21 PM
Hi all,
I'm having issues upgrading 1852e to ME 8.10.
I was able to upgrade from 8.3 to 8.5 with no facing issues, but when i try 8.10 upgrade it says that that "AP is already on ME"
This issue is also seen on 2802e on a customer mine.
In 2802e it also says that "osapiFsWriteNoClose Failed, nbytes: 147,num:-1, errstr:No space left on device"
The command that im using is: ap-type mobility-express tftp://<ip tftp>/XXXXX.tar.
Any reason for this?
Solved! Go to Solution.
05-27-2021 03:33 AM
Hi all,
Thank you for your support in advance.
Yes the way the i was able to resolve it was upload the Lightweight AP Software ( archive download-sw /reload ).
After that the upgrade do ME was direct to 8.10.151.0 ( ap-type mobility-express tftp:// )
Just awesome.
Thanks
05-26-2021 02:09 AM
Can you post fuill Logs what it says ? worth download fresh image from Cisco and Try
also try below :
#archive download-sw /reload tftp://10.10.10.10/new-image
05-26-2021 03:25 AM
This happened to me before and finally I found a procedure that sent to TAC:
HTH
-Jesus
*** Please Rate Helpful Responses ***
05-26-2021 11:16 PM
Hi,
Try update to 8.8 version and then to 8.10.
1. archive download-sw /reload tftp://[IP]/ap1g4-k9w8-tar.153-3.JPK1.tar
then
ap-type mobility-express tftp://tftp IP/version 8.10.tar
Regards
Dont forget to arte helpful posts
05-27-2021 03:33 AM
Hi all,
Thank you for your support in advance.
Yes the way the i was able to resolve it was upload the Lightweight AP Software ( archive download-sw /reload ).
After that the upgrade do ME was direct to 8.10.151.0 ( ap-type mobility-express tftp:// )
Just awesome.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide