UPOE power for the new AP3800 access points

[gp1200x]

If I do not have a 3850 to provide UPOE power are there any UPOE injectors currently available that are known to work with the AP3800s?  I  know 802.3at  injectors will work but these need more power to fully utilize them properly.  I have purchased the external 50W power packs for them but a UPOE compatible injector would be a nicer solution.  

[Leo Laohoo · Accepted solution]

Input power requirements

●  802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE®) ●  802.3at power injector (AIR-PWRINJ6=) ●  50W power supply (AIR-PWR-50=)

[gp1200x]

after a lot of work I found no one that makes a compatible Cisco UPOE power injector as of this time. Thanks 

[DJX995]

I have a 3802E and I have no issues powering it via POE+.

[patoberli]

Cisco has this power injector which is fully supported (which was already posted by Leo): AIR-PWRINJ6