08-05-2013 03:16 AM - edited 07-04-2021 12:35 AM
We had a problem with Virtual Machine which Cisco Virtual WLC installed. Virtual Machine files were damaged and the system was not start normally. We have had to reinstall the WLC, but after installation impossible to import current license to new one.
how can we install this licence again?
Solved! Go to Solution.
08-05-2013 03:44 AM
You need to go to cisco.com/go/license and re-host the license.
08-05-2013 03:44 AM
You need to go to cisco.com/go/license and re-host the license.
08-05-2013 04:44 AM
Martin,
Can you explain me what is the connection between VMware unified identifier and reinstalled vWLC license
thank you
08-05-2013 05:36 AM
Licenses are tied to the device they're being used on. With a virtual WLC, the license is tied to the unique identifier of the vWLC and when you recreated the vWLC after your VMware problems the new vWLC has a different unique identifier.
It's a similar situation to what happens when a physical controller is faulty and is swapped out by cisco, the replacement will have a different serial number and you'd have to re-host the license to the new serial number.
08-05-2013 09:07 PM
Can you explain how can i do that, especially re-host to Vmware serial number, there is no information
thank you
08-05-2013 09:38 PM
Can you explain how can i do that, especially re-host to Vmware serial number, there is no information
---- AUTHOR HAS DELETED POST ----
NOTE: Please avoid making multiple posts of the same topic.
08-06-2013 04:18 PM
Hello,
As per your query i can suggest you the following solution-
Please refer to my post in community forum https://supportforums.cisco.com/message/4008218#4008218
Hope this will help you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide