02-28-2019 05:29 AM - edited 07-05-2021 09:57 AM
Hi Guys,
I am having a vWLC deployment with around 200 APs, vWLC is running version 8.0.152.0.
I have a mesh implementation using AIR-CAP1532E-E-K9, I have total of 17 MESH APs, 4 of them are RAP and the rest are MAP, but i am having very slow throughput in the MAP AP.
Is there anyone who has the same experience here and have managed to solve.
02-28-2019 08:05 AM
- Well for starters there's always 1) Has the Mesh network been site-surveyed for good coverage 2) Is the RF environment sufficiently clean for making clean (/undisturbed) connectivity by clients.
M.
02-28-2019 02:50 PM
For the MESH APs, remember that wireless is a shared medium, so all clients connected to the MAP, share the the medium back to the RAP.
Given you have 4 RAPs and 13 MAPs im guessing that even if the MAPs all directly connect to the RAPs this will mean that effectively 3 to 1 shared again.
Then there is the RAP wired backhall.
If you have client access on the backhall this will be compounded as well, as the backhall traffic will need to contest for airtime with the client traffic.
What SNR and RSSI are the MAPs seeing the RAPs?
How many clients connected to the MAPs.
Are any of the MAPs have childs behind them as well? IE Multi hop back to the RAP.
03-03-2019 03:34 AM
Thanks folks,
I was able to solve the issue!
the issue was, the antennas were installed in port 3 and 4, so we just move it to antenna port 1 and 2 and works as expected.
Thanks
Manny
03-04-2019 03:42 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide