Virtual WLC in LAB environment

[Lajja1234]

Hi!

I have just installed a Virtual WLC at home for lab purpose. Now i want to connect one accesspoint to my wlc, but for now the WLC says "0 access points supported". 

Can i somehow still use the evaluation licens and connect a accesspoint to the wlc? 

/Lajja1234

[Sandeep Choudhary · Accepted solution]

Hi Lajja,

You have to enable the evaluation license in order to allow the AP to join.

How to do it, please check here:

http://www.cisco.com/c/en/us/support/docs/wireless/virtual-wireless-controller/113677-virtual-wlan-dg-00.html

Hope it helps.

Regards

Dont forget to rate helpful posts

[Rasika Nayanajith]

Also note that vWLC only support FlexConnect mode AP. So if you have local mode AP you need to convert it to FlexConnect mode.

HTH

Rasika

**** Pls rate all useful responses ****