vlan group

[muhsi_2015]

Hi,

If I have an ssid test and I created a vlan group for this .

Now If I want to give separate qos profile for these two subnets

Is it possible through ISE

How can I do this

Thanks

[Rasika Nayanajith]

I do not think vlan group feature does not have any relation to this. It simply map those vlan interfaces to a given SSID.

If you require QoS profile to be changed depend on who connects to this network (eg staff vs student), then you can override QoS profile value of a given SSID using RADIUS attributes.

http://www.cisco.com/c/en/us/support/docs/wireless/4100-series-wireless-lan-controllers/96103-wlc-attributes.html

Refer this post as it has some guidance how you can do it on ACS 5.2

https://mrncciew.com/2013/05/21/aaa-override-in-acs5-2/

HTH

Rasika

*** Pls rate all useful responses ***