WAP4410N - Cannot configure date/time

[NiKKrO]

Hi,

I have a WAP4410N for home.

I can't configure the current date/time on the AP as the latest year available is 2015.

The product is not sold anymore but still seem under support until September this year.

Is there a way to configure correct time or get an update to support the current time?

Other Wireless and Mobility Subjects

Best Regards,

Nicolas

[patoberli]

Have you up to date firmware?
I don't know the model, but maybe it's possible to configure NTP?
Also try a different browser to configure it, maybe it's just a browser issue.

[NiKKrO]

Hi,

The firmware is up-to-date but latest firmware is quite old (released in 2015)

I already tried to use NTP without success.

Best Regards,

Nicolas

[VinceToreki6202]

Hi,

Update the firmware to : 2.0.7.8

download from : https://www.cisco.com/c/en/us/support/wireless/wap4410n-wireless-n-access-point-poe-advanced-security/model.html#~tab-downloads

Go to : 

Setup/Time, tick "Automatically" set time zone, enable "User defined NTP server"

NTP server IP : 194.207.34.9

Restart the AP and you will see the time and date will be up to date an accurate.

[NiKKrO]

Hi,

I'm already running the latest firmware 2.0.7.8.

No matter which NTP server I choose, the time is never accurate.

I just rebooter the system with the NTP set to 194.207.34.9 and the time is now set to 2015/07/26 Sun 21:44:16

It looks like the system cannot handle current date/time.

Best Regards,

Nicolas

[patoberli]

NTP sometimes can take a few hours to get synchronized. How does it look now?

[NiKKrO]

Unfortunately, even after few days, the time is still wrong.

It really looks like firmware/hardware issue like if the AP cannot deal with the current date.

Best Regards,

Nicolas