WCS 7.4 Netflow

[JohnsonRyan]

configured the monitor and exporter on the wcs 5508 running 7.4.100.0 and it is not working.  Any advice, like does something else need to be activated on controller?                  

[Stephen Rodriguez · Accepted solution]

did you activate the wlan flow?

config wlan flow

To associate a NetFlow monitor with a WLAN, use the config wlan flow command.

config wlan flow wlan_id monitor monitor_name { enable |  disable}

Syntax Description

wlan_id	Wireless LAN identifier from  1 to  512 (inclusive).
monitor	Configures a NetFlow monitor.
monitor_name	Name of the NetFlow monitor. The monitor  name can be up to 32 case-sensitive, alphanumeric characters. You cannot  include spaces for  a monitor name.
enable	Associates a NetFlow monitor with a WLAN.
disable	Dissociates a NetFlow monitor from  a WLAN.

Command Default

None.

Usage Guidelines

You can use the config flow command to create a new NetFlow monitor.

Examples

This example shows how to associate a NetFlow monitor with a WLAN:

> config wlan flow 5 monitor monitor1 enable

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered