Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Hi a i have this version Ap "c1200-rcvk9w8-tar.124-21a.JA2" and a WLC 5500. When i connect the ap to the network i can ping from ap to wlc and the wlc to ap, but the proccess of lwapp messages give errors on the Ap when the Ap try to download the im...
Hello.Here we have to implement Out of Band with WLC and NAC, I have already checked this guide: http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a0080a138cc.shtmlBut I have a little doubt. On the document showed above do...
Hi,We are retiring our current radius server. It is windows 2003 IAS server (also a DC) that we use for 802.1X auth.We are moving to server 2008r2. I have already installed NPS and Network Authentication services on the server.On the existing IAS ser...
HelloWhen a new Ap is registered in NCS, it appears with an Audit Status = "Mismatch"When we click on Mismatch it says : Attribute = OfficeExtend AP Value: NCS=True Controller=falseNCS is 1.1.1.24Controller is 7.2.111.3We tried with AP 2600i and ...
We are setting an anchor wlc in DMZ and the DHCP is also in the DMZ. Guests can get IP, but cannot get to the login page. when i type the yahoo.com' ip address in the browser, I get this following,any idea?thanks,Hanguest-wlc02/login.html?redirect=98...
Hi all,I'm trying to set up web authentication against radius (freeradius). My goal is that I have blocked users and i would like to difference them from invalid users.When a blocked user tries to logon, the radius replies an acces-reject message wit...
Hi,I'm hoping someone can help here. I have a 2504 WLC and x6 1142 AP's and currently have this working on our corporate network (still in test phase). So far so good and looking at authentication via radius next for this.We have a separate ADSL conn...
With Cisco 3602I , which is a b/g/n device, does much does the spectrum does the client get. Is it 2.4 ghz only or some other value?thanks in advance!
Hi guys, recently we have purchased Reflection - an AirPlay mirroring software. Basically install Reflection in the laptop and you can view the screen of the iPad or iPhone via wireless network. we have tested in home wireless net...
We added a new controller to the group which we want to be as a secondary for all WAPs. How can I set it up so that I don't have to go to each AP individually? Can this be done on the controller or from the WCS?
Hi AllI have AP3500e serises and I need to cover distance up to 300m in directional point. I was trying to find any materials about distance which are covered by different types of antennas but I can't . I think I will prefer to use external antena ,...
Hello all,has anybody faced a freezing problem when you click in Cisco Prime Infrastructure 1.2 down on alarm bar and then to Rogue AP alarms and then try to add an annotitation or change a rogue alarm to Friendly?I tried it on different PC, differen...
I have two Aironet 1242AG access points. Currently, one of those access points is in use with an SSID of ABCWIFI.I want to extend the wireless network to an area that can't be reached by copper or fiber. So, I've purchased another 1242AG. What I'm...
We have a WLC 5500 connected to a 2960 acting as core switch. there is a server attached to the switch , bearing all dhcp pools for lan and wireless users.Can the wlc or the switch be configured in such a way that the wireless users associating to th...
Hi I have installed an Cisco access point that is connected to a Cisco power invertor. The status light is contantly pink with on other green lights. I read somewhere that the AP needs 56 watt of power. Are the POE convertors able to aupply this? Reg...
