01-08-2004 08:12 AM - edited 07-04-2021 09:15 AM
hi
I have a big installation with about 70 offices with aps and in the hq there is acs and a wlse. can i use wds withs PEAP also or just leap? does the rough ap detection also work with peap? on an intel centrino config i saw that just within leap. we are using intel centrino and cisco cards mixed.
second q: when i configure wds i can configure domain groups with radius server in the enws ios version in the web gui i can only configure INFRASTRUCTION or CLIENT authentication over wds. in the cli i can configure both. is this a bug? or do i need one acs for client and one for infrastructur?
bernhard
01-14-2004 06:18 AM
Currently WDS does not support PEAP, only LEAP is supported. You can check in the bug tool kit for any known bugs.
01-14-2004 10:39 AM
My understanding is that WDS has two purposes. 1) fast secure roaming, which you need to use LEAP. 2) Radio aggregation, which you can use any EAP authentication method. So, if you don't need the first purpose then you can use any EAP method for radio aggregation. This would give you the ability to monitor for rogue AP detection etc...
01-14-2004 12:36 PM
I need WDS for the wlse for the radio management and i use peap, so it should work!?
i know that about secure fast roaming, but we dont need it.
bernhard
01-15-2004 02:57 PM
rouge AP detection (and some other wlse features) works only with IOS-AP (not VxWorks) in conjunction with wlse. it's also possible with CCX Ver.2 compatible clients and the wlse to detect rouge AP
fast roaming is also only supported on IOS-AP (the WDS) and with LEAP
01-15-2004 11:00 PM
Thats not correct i have implementet yesterday wds on 40 aps with PEAP and i see the rough aps on the wlse. i think it works with the infrastructure authentication with uses leap.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide