cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
63285
Views
36
Helpful
49
Replies

Web Gui problem

amel.idrizovic
Level 1
Level 1

I have problem with my air ap 1702i converted to w7 ios.all is ok but when i login on web gui and try save or apply anything i get error 404 not found

 

Any tip

Tnx

49 Replies 49

Uh... this has nothing to do with the issues everyone is having here... But thanks for your effort!

luiscandelario4
Level 1
Level 1

So, I am having the same issue after change a 3503i AP over to autonomous mode.  I don't have an issue configuring it via CLI, but I would like to have accessed and being able to make changes via the GUI.  ap3g1-k9w7-tar.153-3JF12i.tar is the OSI

 

Has anyone found a working solution? 

This version is supposed to work: ap3g2-k9w7-xx.153-3.JF10 (ap3g2-k9w7-tar.153-3.JF10.tar)

https://software.cisco.com/download/home/283307699/type/284180979/release/15.3.3-JF10

Ewald
Level 1
Level 1

I am using ap3g2-k9w7-xx.153-3.JF14 which has the same problem for me.

However I do not have a valid Cisco support account (this AP was gifted to me).

Downgrading or upgrading through my own account is not an option for me. Anyone able to help me out?

Umair Awan has shared OneDrive files with you. To view them, click the links below.

[https://r1.res.office365.com/owa/prem/images/dc-generic_20.png]
ap3g2-k9w7-tar.152-4.JB6.tar


[https://r1.res.office365.com/owa/prem/images/dc-generic_20.png]
ap3g2-k9w7-tar.153-3.JF12i.tar

try those links attached to the mail, if not useful then try to download from the below link

http://f.usht.ru/Cisco/IOS/Wireless/AP-Autonomous/

Thank you, you are amazing! It is fixed now

You are welcome

Hi,

I have the same problem with an 3702i. Do you have a firmware for this one? I'm unable to download it.

Thanks

I Have sent you an email.

hi guys I have an AIR-CAP3702I-E-K9 recently purchased new .. I would like to convert it but I can't download the standalone version as I don't have a license agreement.
Is anyone kind enough to send me files via drive?
A thousand thanks

shorturl.at/dyDKP

http://f.usht.ru/Cisco/IOS/Wireless/AP-Autonomous/

try to download from this link and let me know if not available, I will find out for you.

It works with the older firmware ap3g2-k9w7-tar.153-3.JAB.tar.
Many thanks!

Good day  Umair Awan!

 

I have:

Product/Model Number: AIR-CAP2702E-E-K9

System Software Filename: ap3g2-k9w7-xx.153-3.JPK1

System Software Version: 15.3(3)JPK1

Bootloader Version: BOOTLDR: C2700 Boot Loader (AP3G2-BOOT-M) LoaderVersion 15.2(4)JB5m, RELEASE SOFTWARE (fc2)

and when changing settings, get error: 404 not found!

 

Please help fix this!

 

Hi,

Clean install older version like which were released upto year -2017.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card