cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
492
Views
0
Helpful
3
Replies

webauth redirecting to unknown page

sebastianlux
Level 1
Level 1

Hi,

I have a wireless installation using 2 WiSM and 2WiSM2 managed my Cisco Prime.
Actually I have the problem that my webauth is redirecting to unknown webpages instead of 1.1.1.1.

Can anybody tell me what's wrong with my webauth-config. It is configured to use the "default internal" authentication (local).

Thanks a lot

Sebastian

2 Accepted Solutions

Accepted Solutions

Hello Sebastian,

Please refer the below guides which can help you on the trouble shoot your webauth redirection issue.

https://supportforums.cisco.com/document/12489321/web-authentication-1111login-redirect-issue-wireless-lan-controller

https://supportforums.cisco.com/document/53396/web-authentication-wlc-wireless-and-wired-complete-guide

Hope this will help you

View solution in original post

3 Replies 3

Hello Sebastian,

Please refer the below guides which can help you on the trouble shoot your webauth redirection issue.

https://supportforums.cisco.com/document/12489321/web-authentication-1111login-redirect-issue-wireless-lan-controller

https://supportforums.cisco.com/document/53396/web-authentication-wlc-wireless-and-wired-complete-guide

Hope this will help you

sebastianlux
Level 1
Level 1

problem solved...

There was a DNS name configured on the interface for which name resolution wasn't configured properly.

 

Thank you anyway

Review Cisco Networking for a $25 gift card