05-21-2019 02:59 AM - edited 07-05-2021 10:26 AM
Hi,
I am trying to figure out what the NAC State option under Advanced tab in a WLAN does if I sett it to ISE.
What extra information is sent to the ISE?
I have a usecase to do both dot1x and MAB on the same SSID. To be able to do that I have to set NAC state to None, at the moment it is set to ISE NAC. I do have a ISE-server for authentication.
What I want to know is what I loose if I change it from ISE NAC to None.
Regards
Philip
Solved! Go to Solution.
05-21-2019 12:19 PM
Hi Philip,
WLC will not support both MAB and 802.1x on a same SSID.
These two links explain the Radius/ISE NAC Radius NAC and Wireless LAN Controller RADIUS NAC and CoA Overview
05-21-2019 04:38 AM
05-21-2019 12:19 PM
Hi Philip,
WLC will not support both MAB and 802.1x on a same SSID.
These two links explain the Radius/ISE NAC Radius NAC and Wireless LAN Controller RADIUS NAC and CoA Overview
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide