what dscp values are passed from the controller

[Scott Fella]

My client wants to know what values are being passed for voice. they have a standard config on their switches and want to make sure the wireless network matches with the LAN side. would I just configure those values on the switch ports that the WiSM is connected to?

[irisrios]

Enter the service-port interface IP configuration protocol, either "none" or "DHCP". If you do not want to use the service port or if you want to assign a static IP address to the service port, enter "none".

[gpulos]

wireless qos configuration includes specifying traffic, prioritizing traffic and congestion management but is limited to a point as APs do not classify packets, construct internal dscp values or match packets using acls.

please see the following link for more info on wireless QoS configuration:

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184a9d.html