What is the coverage area of Cisco Catalyst 9105AXI-C?

[tanuraj]

Dear Concern,

What is the coverage area of Cisco Catalyst 9105AXI-C? Is there any data sheet related to this?

[marce1000]

 - Whilst the coverage area for the particular AP might be important , it will fade w.r.t other parameters such as 'coverage area' (area reachability) for your clients , let alone environmental parameters  such as building and rooms layout(s) presence of walls , etc. That's why a site survey is needed , which can be related to the particular AP model and band too (note for instance that  6Ghz requires separate site survey)

 M.

[Rich R]

The install guide shows the radiation pattern for the AP but that does not define coverage as Marce has already explained.
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/9105ax/quick/guide/ap9105axi-getstart.html#pgfId-100319

For that you need to get an expert wireless site survey done.

[pieterh]

in open space you may "see" the SSID of this access point over 100meter distance, 
but no guarantees about performance here !!!

thus in addition to previous contributions
the coverage area depends on some criteria you need to set
like how many bandwidth do you need at any point in your environment
plus how many noise is present in your environment (e.g. signal of other devices on the same frequency)
if you need high speed, the coverage area decreases
if you are using voice/video streaming, the criteria for signal quality are higher
if you are only using stationary laptops, you may need other numbers than using mobile phones

so the only correct answer is find someone that interviews you about the criteria needed for your demands
he can translate this to wireless signal parameters that are necessary to fulfill this
and perform a site-survey to determine what area is covered complying to these criteria