03-14-2024 11:52 AM
What should be ideal AP connected swich port configuration? We have configured below config in our environment but sometimes facing issues due to same. Please confirm if there is any issue with below config.
Access point Interfaces |
Local model Access points |
interface GigabitEthernet <interface id> |
description wireless_ap |
spanning-tree portfast |
switchport |
switchport mode access |
switchport access vlan 90 |
logging event link-status |
logging event power-inline-status |
service-policy output AutoQos-4.0-Output-Policy |
no shutdown |
Flex connect Access points (with Local Switching) |
description wireless access point |
switchport |
switchport trunk encapsulation dot1q |
switchport trunk native vlan 90 |
switchport trunk allowed vlan 90,40, 50-59,78 |
switchport mode trunk |
logging event link-status |
logging event power-inline-status |
spanning-tree portfast trunk |
service-policy input AutoQos-4.0-CiscoPhone-Input-Policy |
service-policy output AutoQos-4.0-Output-Policy |
no shutdown |
03-14-2024 11:56 AM
That should be ok - personally i remove auto QOS and test it
We have configured below config in our environment but sometimes facing issues due to same
what kind of problem ?
Also you have some other VLAN other than 40, in the trunk what are that VLAN for ?
make sure layer 2 spanning correctly (if you have STP root some where ?)
03-15-2024 12:05 AM
Agree to @balaji.bandi by removing AutoQoS line if you don't have end-2-end QoS configured from endpoint to the WAN router, and giving us additional information about the issues you are facing.
Those configurations are the basic ones for APs in local and Flexconnect mode so no problem on that.
I will recommend you to review the IOS code the switch is running (seems to be pretty old switch due to the fact tha you need to set the encapsulation piece) and the trunk port oversubscription. Additionally, as you are not mentioning the AP model you are using, and supposing you are using a mid/high-end enterprise model, check whether your switch do support PoE+, otherwise you can notice weird behaviours like disconnections, or low performance due to AP disabling some radios/streams.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide