Yesterday I found the log about below.-Traceback: 0x1145ed18 0x115e467c 0x114bb914 0x114d01b8 0x114d1fdc 0x114d07c0 0x114d80f0 0x114d8884 0x114719a8 0xfff6e4a888 0xfff6d5ccfc*redXmlTransferMain: Jun 28 16:17:10.470: %OSAPI-5-FILE_DEL_FAILED: [PA]osa...
Forum Posts
Hello Cisco Prime Freaks,I would like to filter on WLAN APs in maps using 2.4GHz.But Prime is always starting with a wrong filter-statement of 6Ghz-radio on 2.4GHz-map:Unfortunately I cannot delete the wrong filter argument.I tried in vain already se...
Hi All,We have a pair of 8540 WLC's (8.10.151.0) in HA with > 2,500 AP's registered. Approx. 2,000 of the APs are 802.11ac wave 1 APs.To accommodate some new WiFi6 APs we need to upgrade the controller to a min. version of 8.10.183.0.The upgrade is c...
Hello,EWC with 2x 9120 with 17.3.6.I have access to the GUI and theo APs are in active standby (this would be another question, since I never asked for redundancy).I see the APs are registered and I can push config like SSID or controlling whether th...
when i reset the device i get the error:Then i do delete but the device still can't resetplease help me.
Resolved! Freeradius WLC wrong User-Password
Dear ALL, I'm implement the WLC + Freeradius for MAC auth, but i found the WLC always sending the "secret" as User-Password in "User-Password" attribute, the Freeradius will show "Access-Reject", if the freeradius attribute’s Cleartext-Password to ...
ip http serverip http authentication localip http secure-serverip http secure-trustpoint CISCO_IDEVID_SUDIip http client source-interface GigabitEthernet1destination transport-method httpI have enabled this above commands as well, But unable to acces...
Hi Team, i have observed one issue where for1 AP, users are having issues to access interent when they already connected to that AP. Initially user can connect and can access internet but after 30-40secs they are loosing internet access and remain c...
Resolved! AP Join issues for select APs
I have an existing 5508 with about 400 APs that has been in place and working well for many years. I am in the process of adding a few new APs and I've had a problem with joining some of them. Out of about 20 APs, about 5 of them have problems join...
Hello, I have a new 9800-L that I'm trying to OS upgrade.Default is 17.03.04c and my target OS is 17.9.3 , I've tried directly upgrading it to that OS but encountered issue terminating the upgrade, since there is a big difference in OS version I trie...
Hello We have an C9800-CL, and we want one SSID to be "Flex" and another one "central switched". Is that possible? If so, what mode do we need to configure the AP? Thank you Marcos
Hello.From documentation, it says that 9130 supports dual 5ghz mode supporting both Macro/micro & Macro/macro operation mode. The Catalyst 9166I, when operating as dual 5 GHz, offers two independent macro-macro cells but no macro/micro mode. From the...
Hi all, Controller: Cisco Virtual Controller (Version 8.5.161.6) Existing APs on the controller : AIR-CAP3702I-E-K9,AIR-CAP3702E-E-K9,AIR-CAP3602I-E-K9,AIR-AP3802I-E-K9,AIR-AP3802E-E-K9 Now I need to add another AP (C9115AXE-E) to the controller, Is ...
1815w-B-K9 ME still cant see 3600,it show log.Country code is US.Jul 6 09:54:14.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.100 peer_port: 5246*Jul 6 09:54:14.327: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessf...
Hi, Has anyone experienced increased latency after replacing AP and WLC from 2702I/5520 to 9164I/9800-40? AP2702I + WLC5508 in centralized (AP local mode) and C9164I + C9800-40 in centralized (AP local mode) Same config, same environment, same radio ...
