08-12-2018 06:27 AM - edited 07-05-2021 08:58 AM
Hello,
What would be the most recommended TX power level, If you needed to set the power manually on the WLC? Thanks
Solved! Go to Solution.
08-12-2018 06:39 AM
Hi
I'd depends on the area you need to coverage. The TX power will determine how big will be the Access Point cell.
You can do a site survey in order for determine at which distance the signal must go and at which RSSI level.
Keep in mind however that there's a phenomenon called Fading that cause the signal level to vary constantly.
It is safe to assume 10dBm margin.
-If I helped you somehow, please, rate it as useful.-
08-12-2018 06:39 AM
Hi
I'd depends on the area you need to coverage. The TX power will determine how big will be the Access Point cell.
You can do a site survey in order for determine at which distance the signal must go and at which RSSI level.
Keep in mind however that there's a phenomenon called Fading that cause the signal level to vary constantly.
It is safe to assume 10dBm margin.
-If I helped you somehow, please, rate it as useful.-
08-12-2018 06:46 AM
08-12-2018 08:51 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide