06-22-2016 06:47 PM - edited 07-05-2021 05:17 AM
Wifi credentials are not working in mobile, same credentials are working fine in Laptop.
06-23-2016 01:16 AM
thanks for reply
but please can you tell me what in security 802.1x disabled and enabled in Auth key management.
06-23-2016 01:22 AM
06-23-2016 01:34 AM
yes , but i want to know about 802.1x , why it is happend when i am using 802.1x with wep users are not connecting by mobile
06-23-2016 01:45 AM
did you conifgure your mobile correctly with 802.1x+wep ??
Chekc this doc: http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/82135-wlc-authenticate.html#conf-6
If its not working then use wpa2/802.1x and try again.
Regards
Dont forget to rate helpful posts
06-23-2016 02:34 AM
Q- As per the below snapshot, you can see, On 48port switch, 24 Port and the uplink port( from NM module) is connected on ASIC and the rest port is connected to another ASIC. How traffic flow from Port1 to Port25( Assume Stack cable is not connected).
i just copy this diagram threw internet and paste here. please reply ASAP.
PFA... do you have any idea regarding this
06-23-2016 02:37 AM
No Idea about switch ASICs.
06-22-2016 11:51 PM
what happen , did you find anything
06-22-2016 08:47 PM
What kind of authentication protocols used?, will the mobile support those protocols?, any other mobiles able to connect to same network?
06-22-2016 08:52 PM
please let me know one thing , can we check in wlc that android can access wifi with same credentials which we are using to connect our lapi...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide