03-10-2012 12:02 AM - edited 07-03-2021 09:46 PM
Hello Support Team,
I have a Windows 2008 R2 server, i want to configured NPS (Radius) Server on windows 2008 server for WLC client and AD users autentication.
I am tried to configured but failed. AD users are not autenticated.
have you any guide for windows Radius configutation please share.
03-10-2012 05:16 AM
Take a look at this guide.
EDIT: Sorry bad cut n paste
http://communities.intel.com/servlet/JiveServlet/previewBody/4321-102-1-7037/SImple%20NPS%20Configuration%20as%20Radius%20Part%201.pdf
HTH
Thanks,
Scott Fella
Sent from my iPhone
03-10-2012 10:08 PM
Thankx for the reply Scott.
But this not my answer..
Thanks,
Chandan
03-11-2012 04:41 AM
I edited the other post since I pasted the wrong link. You can also look at any IAS configuration because they are pretty close as to the policy configuration.
http://www.microsoft.com/download/en/details.aspx?id=8089
Thanks,
Scott Fella
Sent from my iPhone
05-06-2013 03:14 PM
Did you find the requested guide??? (step by step configuration of the windows server 2008 and the wlc)
05-06-2013 07:05 PM
How about this
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
05-07-2013 08:12 AM
Could you provide me the error from the NPS > event viewer? The error message would point us in the right direction.
Jatin Katyal
- Do rate helpful posts -
05-07-2013 10:54 AM
I just added this last week. I think there are some similar Docs out there on the internets, but this should take you top to bottom for an NPS install, including all prerequisites such as a CA, etc.
https://supportforums.cisco.com/docs/DOC-32752
As Jatin suggested, if you have any errors on NPS you can share, it could be helpful.
It would also be helpful to collect a client debug to "verify" whether we are communicating properly with the RADIUS server or just being "rejected".
From the WLC CLI, start the following for a test client. Then connect and attempt to authenticate with the AD credentials. Post the collect outptus back here.
>debug client
05-07-2013 06:19 PM
yep, that's how we can filter out the client specific debugs and see what exactly radius returning...
fyi, here is a path you need to look out for NPS error.
go to NPS > administrative tools > event viewer > Custom views > server roles > network policy and access-services.
Jatin Katyal
- Do rate helpful posts -
05-08-2013 11:02 PM
Hi i done similar in past are you still having the issue or is it fixed
Sent from Cisco Technical Support Android App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide