09-15-2013 12:49 PM - edited 07-04-2021 12:50 AM
Is this feature available any latest WLC code ? Config Guides does not clear on this.
I found below config example for WLC 4.x & it stated this feature is not supported. Not sure if behaviour was modifed in any later release. I have checked with 7.x & seems not working.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808ed026.shtml
Is there any way to get multicast working on wired guest (even in single controller environment) ?
Regards
Rasika
09-15-2013 02:37 PM
You talking about Bonjour?
09-15-2013 03:34 PM
Hi Leo,
No, Normal wired guest user (like wireless guest users, we can create wired guest users traffic send to a anchor controller & then get an IP in a guest-lan configured on that)
My test setup is simple & having single WLC. I have crated a Guest LAN on a 4402 controller with vlan 139 as ingress (purly L2 & no gateway defined) & egress interface as vlan 130 (proper L3 gateway & DHCP defined)
When a PC put into vlan 139 switch port it is getting IP from vlan 130 as expected . Can browse with web pass through as I configured L3 security like that. I would like to know whether I could get multicast working for this wired guest user.
Hope that clear
Regards
Rasika
09-16-2013 03:34 PM
We don't have any anchor controllers.
All our staff, student and guest access (wired/wireless) goes through a series of proxy servers, RADIUS and F5 load balancers.
And we use 802.1x for wired and wireless. We have no MAB on wireless.
09-16-2013 07:43 PM
thanks Leo for the response. So you are not using a WLC at all for wired guest user service.
In my case all wireless guest traffic goes to Anchor & I am looking to do the same for wired guest. It is my interest to see whether multicast service is working in this scenario.
Rasika
09-16-2013 08:19 PM
Nope. Not for wired. Wired guests go straight to a proxy server.
10-03-2013 04:08 PM
Hello,
For now Wired multicast feature is not supported.
http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_overview.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide