Wireless advice

[ievalleyccie]

Hi ,

I am new in the Cisco Wireless . I've 3 APs and I'd like to configure them as Hub and 2 Spokes  .

What I know that I should configure the Hub as root and the Spokes as Non-Root bridge

and I don't know If i should connect all the APs to switches or what ?

Pls Advise

[Leo Laohoo]

Wireless Bridges Point-to-Point Link Configuration Example

[ievalleyccie]

Thanks but should i connect the Hub only to a switch or it doesn't matter ?

[Leo Laohoo]

A wireless bridge is use to connect to physical device or location using wireless.  Like this:

LAN A --- WAP A << ---- WIRELESS ---- >> WAP R -- LAN R

[ievalleyccie]

what about the following

                                           ---------------Wireless ------------------- WAP B  ----- Wirless clients 1 (No switch)

Lan A(Switch) --WAP A      |

                                            --------------Wireless ------------------- WAP C  ----- Wirless clients 2 (No switch)

Can Wireless client 1 connect to Wirless Clinet 2 ?

[Leo Laohoo]

Sure.  Why not.