Wireless Controller Web Interface WLAN SSID Sorting issues

[dprior]

I'm seeing a few issues with SSID sorting on the "simple" interface for the 2500 Series Wireless Controller (I assume this extends to other products as well).

In no particular order:

- Clicking the Column to Sort by WLAN SSID Doesn't work. The clients are not sorted. 

- You can only see 25 or 50 clients at a time. This is a problem because the only workaround for sorting involves copy/paste into spreadsheet software.

- The "Advanced" interface doesn't show hostnames for connected clients, therefore cannot be used as a substitute for the new one.

[Leo Laohoo]

Are you talking about the Dashboard?

[dprior]

Yes, the Dashboard, clients section.

[Sandeep Choudhary]

Go to Monitor > Clients and then try to play with Change Filter to sort out the clinets which are connetce dwith specifi WLAN

Regards

Dont forget to rate helpful posts

[dprior]

When I use the Filter option, the entire client list disappears.

[Sandeep Choudhary]

which software version you are using ?

did you try with anoother browser ?

Regards

Dont forget to arte helpful posts

[dprior]

Yes, I've tried chrome and safari, possibly even others. Very clearly sorting by SSID does not work. Filtering by SSID doesn't work either.

Software Version 8.2.164.0. Cisco 2500 Series Wireless Controller

[roosorio]

Hi

What are you trying to see, the filter option in 2504 works for me with no issues.

I would recommend for you to upgrade to the latest on 8.2 which is 8.2.166.0.

Please do try to upgrade also your browser or use internet explorer.

Also as an advise, by upgrading your wlc to 8.2.166.0 you will be avoiding this nasty bug

CSCvf52723

Let me know if it works.

-Rodrigo Osorio Porras

[roosorio]

Hi

What are you trying to see in the filter option?   2504 works for me with no issues.

I would recommend for you to upgrade to the latest on 8.2 which is 8.2.166.0.

Please do try to upgrade also your browser or use internet explorer.

Also as an advise, by upgrading your wlc to 8.2.166.0 you will be avoiding this nasty bug

CSCvf52723

Let me know if it works.

-Rodrigo Osorio Porras

[dprior]

when you click on the WLAN SSID Column, does it sort the list properly?

[roosorio]

What I do is:

go to monitor tab

Select clients

Click on change filter

only selec "WLAN SSID" checkbox and select the ssid I want to see.

Click apply.

and it only shows me the clients on that ssid.

Is this what you want?

[dprior]

uploaded gif of behavior

[roosorio]

I see.

Are you using a mobility express solution?

Could you tell me the model of WLC you are using?

You can see this with "show inventory"

I have not test this on ME if that is the case. 

Once you provide this I can test and let you know.