08-17-2015 09:30 AM - edited 07-05-2021 03:47 AM
Hello Experts,
Hope you are doing well!
I am using 5508 controller and couple of sites are used on Flexconnect mode, I want to know if I can configure L3 roaming on the SSID? if, yes how?
Thanks in advance!
08-17-2015 07:49 PM
Hi lenkasurat,
For the sites running Flexconnect mode is the SSID set to Local or Central Switching? You will be unable to perform L3 Roaming on the APs in local switching mode. This table below is sort of helpful but see the full feature matrix here:
Mobility / Roaming Scenarios
WLAN Configuration | Local Switching | Central Switching | ||||
CCKM | PMK (OKC) | Others | CCKM | PMK (OKC) | Others | |
Mobility Between Same Flex Group | Fast Roam(1) | Fast Roam(1) | Full Auth(1) | Fast Roam | Fast Roam | Full Auth |
Mobility Between Different Flex Group | Full Auth(1) | Fast Roam(1) | Full Auth(1) | Full Auth | Fast Roam | Full Auth |
Inter Controller Mobility | N/A | N/A | N/A | Full Auth | Fast Roam | Full Auth |
(1) Provided WLAN is mapped to the same VLAN (same subnet). |
08-18-2015 01:57 PM
No L3 roaming support in FlexConnect design (except central switching which is similar to local mode AP deployment).
HTH
Rasika
08-18-2015 10:37 PM
Thank you !! Mananalage & Ric
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide