10-08-2012 08:38 AM - edited 07-03-2021 10:47 PM
I am trying to pass a WCS AP Template to my Test Mesh Root AP, when I try and apply the template, I get the following error:
Failure: MEDIATION-1,Attempt to set conflicting attribute value,LradIf,adminStatus,LradIf! followed by the mac address.
This is the first attempt to try and set a mesh Root AP up, any help would be appreciated.
thanks
nev
10-11-2012 12:35 PM
Neville,
What settings are you trying to push via Template on the 802.11b/g/n parameters?
10-14-2012 11:44 PM
This is the template I have passed to the RAP
10-13-2012 03:01 AM
Is the RAP up?
Are the RAP radios up?
How the RAP is powered?
Wireless>> All APs>> Select RAP>> click advanced - Under "power over ethernet settings" what option is selected. select the power injector if not already and try pushing the template.
10-14-2012 11:45 PM
Hi
The RAP is up, the error occurs when I try and enable the radios. The RAP is poered over ethernet directly from a 3750x with dual power. Any help would be welcome.
thanks
nev
10-15-2012 03:09 AM
The radios will not come up when powered up by a PoE switch. You need to use the power injector specifically for the MESH AP or hard wired to a power source.
http://www.cisco.com/en/US/docs/wireless/access_point/1550/power/guide/1550pwrinj.html
Powering up the 1550:
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide