03-11-2014 10:15 AM - edited 07-05-2021 12:24 AM
Dear All, We are using Cisco wireless controller 5508 with Cisco Aironet Access Point 1131G –E-K9
The wireless coverage in rooms is very weak . We have 10 rooms in each floor and 2 access points in each floor. If anyone help me to increase the singe strength
03-11-2014 10:51 AM
If your TX power lever for both bands are at power level 1, then you are at your max. The issue can be that your AP's are in the hallway and in line of sight and might be reducing the power down. Or that the walls are attenuating the signal and thus you will need more access points. So take a look at your 802.11a and 802.11b and see what power levels you have.
You can also issue from the cli
show advanced 802.11a txpower
show advanced 802.11b txpower
03-11-2014 11:38 AM
Dear Scott,
Thank you for your prompt replay, I install access point in my room then check the single it showing only 4 point. I have an another DSL modem with router its signal is excellent.
Is there any configuration problem in WLC and AP
03-11-2014 12:26 PM
03-12-2014 05:35 AM
Please recommend a powerful access point also an external antenna compatible with WLC 5508
03-11-2014 02:46 PM
03-12-2014 05:34 AM
Dear Leo
Thank you for your replay
I am sorry to say it’s not possible to keep an access point in each room, we can only install hallways
Please recommend a powerful access point also an external antenna compatible with WLC 5508
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide