Wireless VLAN setup with 802.1x clients

[ctinajero]

Hello there,

All my WAPs are running Cisco 350 Series AP 12.02T1. I set up a couple of VLANs (one for the users and the other one for the WAPs). All my Cisco Aironet clients worked fine; however, my 802.1x clients could not associate.

I need specific steps on how to set up my WAPs with VLANs to service Cisco Aironet clients as well as 802.1x.

Any help would be greatly appreciated.

Carlos T.

CCNA

[derwin]

ensure your vlans are correctly set up as per this link

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350ch4.htm

Then within the vlan you want eap make sure it is configured as per

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350ch4.htm

Then if it is still not working use the EAP diag found here to see if the problem is the client the ACS or AP

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap35ch13.htm#1044224