Wireless VLANs and Layer2/3 VLANs

[techguy]

Dear,

The vlans created for the mapping of SSID in embedded AP on cisco 1941 can be connected/communicated to the VLAN created on Layer2/3 switch.

Lets say i have created 3 vlans (say 200,201,202) for 3 ssid and the vlan created on switch (say 200,201,202) can be communicated?

Or these wireless vlan are purely for the mapping of ssid?. Thanks

[Surendra BG]

yes.. the VLANs can be communicated between them.. Wireless is just the extention to the wired, not more than that

Regards

Surendra

[techguy]

Can you tell me from layer 2/3 switch , wen need to make trunk if so, that cable will go out to which interface of Cisco 1941 to communicate with WVLANs. Can you please tell me the code of doing so. Thanks

[Surendra BG]

yes that should be a trunk.. the below link is the configuration guide..

https://www.cisco.com/en/US/docs/routers/access/1900/software/configuration/guide/Software_Configuration.html

http://www.cisco.com/en/US/docs/routers/access/1900/software/configuration/guide/wlan.html

Regards

Surendra