WISM 2 evaluation license

[Mohamed Sayed]

Hi all,

I need to deactivate the evaluation license on cisco wism2 to enable the HA configuration.

how can I deactivate it.

thanks in advance

[Leo Laohoo]

If you apply the HA license, the evaluation license will turn off.

[Mohamed Sayed]

Hi Leo Laohoo ,

I need to deactivate the evaluation one to let the HA comes up as when i configure the HA between the two WISM2 the secondary one get into maintenance mode and appear the following log:

!

Starting Licensing Services: ok

Starting Redundancy: Starting Peer Search Timer of 120 seconds

Cannot open the file /mnt/application/ha/InheritedApCount.txt

Cannot open the file /mnt/application/ha/InheritedApCount.txt

Redundancy Link is down. Entering maintenance mode to avoid network conflict.

Entering maintenance mode...

ok

Starting LWAPP: ok

!

and i reviewed the configuration more than one time

so I think in this way to deactivate the evaluation lic

please advice

thanks in advance

[Leo Laohoo]

It's not your license.  It's your configuration.  

Post your IP address schemes for the Management IP address, your Redundancy Interface IP address from your WLC (both of them).