05-22-2013 09:20 AM - edited 07-04-2021 12:06 AM
Hi my friends:
Its posible to implement feature H-reap in wlan controller 2504 with iso version7.2.103.0, because i dont have this option in my wlan controller.
thank.
Marco
05-22-2013 09:22 AM
in 7.2 code and beyond, the feature is renamed to FlexConnect.
So you would check the FlexConnect Local Switching box in the WLAN and the AP mode to FlexConnect
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
05-22-2013 09:26 AM
Thak.. so much my friend.. i found it. the way to configuring FlexConnect is the same h-reap ?
05-22-2013 09:28 AM
that is correct.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
05-22-2013 09:29 AM
Muchas gracias amigo!
06-11-2013 02:27 PM
Hello,
As per your query i can suggest you the following solution-
Yes it is possible to implement feature H-reap in wlan controller 2504 with iso version7.2.103.0.This is known as flex-connect.
For more details on how to configure flex-connect please refer to the link-
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html
Hope this will help you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide