08-08-2013 06:08 AM - edited 07-04-2021 12:36 AM
Using a 7510 Controller.
Many WLANs configured and want to redirect the url for a select few of them.
The WLANs are all configured Web Policy / Passthrough no Pre Auth ACL and Web Auth Type internal.
I need to redirect these WLAN to a specific url which is same url for each of the WLAN's Im changing. I will need to do this without affect the already business users using a flex acl and web splash.
Where and how to change the redirect url.?
Is this on the Security TAB / Web Auth / Web Login -- Redirect URL after login drop down
or
do I need to go into each vlan and change the WLAN - EDIT - Securit -L ayer 3 and set Web Auth to External?
This second option will require ACL also and is a bit more complicated.
08-08-2013 08:58 AM
08-08-2013 09:01 AM
no, you woudln't need to change it for every WLAN. If you want use the same redirect for all WLAN, then you would do it in Security > Web Auth > redirect URL
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide