07-05-2018 11:54 PM - edited 07-05-2021 08:48 AM
Hi All,
Good day!
I would like to ask for your expertise regarding peer2peer blocking. We are currently running version 8.0.140.0 on 5508 WLC. peer2peer blocking is enabled on WLAN but wireless client on the same WLAN can still ping each other. Would like to know if there is resolution for this. Thank you.
Rey John Mamaril
07-06-2018 12:17 AM - edited 07-06-2018 12:17 AM
HI,
It should be set to DROP .
Info: The Peer-to-Peer Blocking feature blocks communication between two clients on the same WLC (option drop) on a WLAN.
Regards
Dont forget to rate helpful posts
07-06-2018 12:31 AM
07-06-2018 12:38 AM
AP are in flexconnect mode or local mode ?
is it slocal switching enabled 802.1x WLAN ?
Regards
Dont forget to rate helpful posts
07-06-2018 12:39 AM
Hi Sandeep,
APs are in local mode.
Thank you.
07-06-2018 12:42 AM
Is this across multiple WLCs ?This feature works for clients on same WLC!!
Regards
Dont forget to rate helpful posts
07-06-2018 02:04 AM
07-06-2018 02:40 AM
Hi Sandeep,
clients are on the same WLC.
Thank you.
07-06-2018 03:42 AM
If you have only one WLC, AP connected it with local mode , Clients are in layer 2 network and P2P is set to drop then it must work.
Open a TAC case!!!
Regards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide