08-15-2018 12:59 AM - edited 07-05-2021 08:59 AM
Hi, I had a problem connecting cisco WLC 2504, mikrotik, and Linksys Managed Switch.
1. vlan untagged on WLC management interface.
2. DHCP Server on mikrotik. I also set this up for WLC DHCP Server and default gateway.
3. I plugged in the WLC and AIR AP3502i on Linksys Managed Switch, I set trunk port for WLC and Access port for AP.
4. From Linksys Switch there's interface to mikrotik (configured with trunk)
5. On mikrotik to Linksys Switch is bridge_Vlan interface (many vlan here)
Conditions :
1. AP Joined, but I can't get IP address when connecting to SSID
2. All device can ping each other
3. I also have set capwap primary controller for AP
4. I don't know if there's option 43 config on linksys switch
From the case above, anyone can give me suggestions?
08-15-2018 01:35 AM
08-15-2018 01:59 AM - edited 08-15-2018 02:01 AM
@Masato Ueoka wrote:
HI
What is interface for your WLAN is it management interface or Dynamic interface?
Do you config Primary DHCP Server to milkrotik and DHCP Proxy Mode is on ?
I used management interface for wlan
yes i config dhcp primary to mikrotik and dhcp proxy is global
is it problem?
08-15-2018 05:29 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide