WLC 2504 Configuration Mismatch between confile file and GUI

[shadowplay101]

Hi All,

The config file in my controller shows this two commands:

config network broadcast enable
config network multicast global enable

Running 'show network summary' gives me this:

Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable

Also, in my GUI Broadcast Forwarding and Global Multicast Mode are disabled.

Why the mismatch?

Thanks

Thanks

[Prakash Parvathala]

Hello Luis,

Please refer the below links which can help you on the configuration .

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0MR1/configuration/guide/wlc_cg70MR1/cg_controller_setting.html

[Prakash Parvathala]

Hello Luis,

Please refer the below links which can help you on the configuration .

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0MR1/configuration/guide/wlc_cg70MR1/cg_controller_setting.html