cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
688
Views
0
Helpful
3
Replies

WLC 3504 no ping with router

adminadmin7605
Level 1
Level 1

HI all,

 

I need to create a Wlan for guests, so i have a dedicated XDSL line, connected on port 3. i've created an interface with port 3 on physical information, an IP (192.168.10.2) that match with range of my router (192.168.10.1) and setted up DHCP with router's IP. No communication between WLC ad router. when i plugged a PC, it have an IP from router and i can ping it. What's happened with WLC ??? thanks

3 Replies 3

Scott Fella
Hall of Fame
Hall of Fame
Maybe your vlan tag is wrong… probably need to be set o zero ‘0’.
-Scott
*** Please rate helpful posts ***

There's already have a VLAN 0 (internal WLAN to LAN, with radius authentication which work properly).

 

thanks,

If you can ping from another device to the WLC’s is address, then there is nothing wrong with the controller. As long as you are not tagging the vlan on the wlc it should work. I’m also assuming that your router is not tagging the vlan?
-Scott
*** Please rate helpful posts ***
Review Cisco Networking for a $25 gift card