06-26-2012 01:38 PM - edited 07-03-2021 10:20 PM
We currently have AP1142N's and decided to step up to AP1262N's to see if we liked them better. I TFTP the ap3g1-rcvk9w8-tar.124-23c.JA5.tar to the new AP for LWAPP. It did work, but won't join the WLC and we get the following message if I'm consoled into the AP.
CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0.199.4 on WLC
So, I'm assuming that I'll have to update the 5508 WLC in order for them to work? Any advice would be nice.
Thanks,
Solved! Go to Solution.
06-26-2012 01:59 PM
Correct, you need to be running 7.0 to be able to suppor teh 1262. But if you're going to upgrade might as well go to the latest 7.0
HTH,
Steve
-----------------------------------------
Please remember to rate useful posts, and mark questions as answered
06-26-2012 03:38 PM
So, I'm assuming that I'll have to update the 5508 WLC in order for them to work? Any advice would be nice.
I am with Steve. You need to upgrade the firmware of your WLC.
If you have WLC 2504/5508/WiSM-2 and you don't have any WiSM-1, 440X then upgrade to 7.2.110.0. Otherwise, if you have the old models then go to 7.0.235.0.
06-26-2012 10:39 PM
AP data sheets say that the folloiwng are the supported softwares on this AP:
Cisco Unified Wireless Network Software Release 7.0 or later
Cisco IOS® Software Release 12.4(25d)JA
Reference: http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10980/data_sheet_c78-593663.html
so you need 7.x code version on your WLC.
HTH
Amjad
06-26-2012 01:59 PM
Correct, you need to be running 7.0 to be able to suppor teh 1262. But if you're going to upgrade might as well go to the latest 7.0
HTH,
Steve
-----------------------------------------
Please remember to rate useful posts, and mark questions as answered
06-26-2012 03:38 PM
So, I'm assuming that I'll have to update the 5508 WLC in order for them to work? Any advice would be nice.
I am with Steve. You need to upgrade the firmware of your WLC.
If you have WLC 2504/5508/WiSM-2 and you don't have any WiSM-1, 440X then upgrade to 7.2.110.0. Otherwise, if you have the old models then go to 7.0.235.0.
06-26-2012 10:39 PM
AP data sheets say that the folloiwng are the supported softwares on this AP:
Cisco Unified Wireless Network Software Release 7.0 or later
Cisco IOS® Software Release 12.4(25d)JA
Reference: http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10980/data_sheet_c78-593663.html
so you need 7.x code version on your WLC.
HTH
Amjad
06-27-2012 10:44 AM
Thanks guys, so I have software version 6.0.199.4 on the 5508 WLC, so I should be able to upgrade straight to one of the 7.x versions without issue, correct?
I realize that the WLC will need to reboot after the upgrade, so I need to inform everyone of downtime. How long should it take to TFTP the file, upgrade, then reboot?
Again, thanks for all your help!!
06-27-2012 11:07 AM
You should have no problem wit the upgrade. If you are currently all 1142, you can use the pre-download feature to push the image to the AP, prior ot rebooting the WLC. So all they have to do is reboot, and come up on teh new code, vs downloading on join.
If you use the pre-download should be abot 5 minutes from the reboot.
HTH,
Steve
-----------------------------------------
Please remember to rate useful posts, and mark questions as answered
06-27-2012 11:18 AM
yes, 6.0 to 7.0 is straight jump.
Predownloading an Image to an Access Point:
http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60mfw.html#wp1132291
06-27-2012 02:02 PM
The 1142N AP's currently have the LWAPP on it: c1140-rcvk9w8-tar.124-21a.JX.tar
They have already been joined to the WLC before, so are you saying they will have to be updated again?
Thanks,
06-27-2012 02:04 PM
Yes, when you upgrade the WLC, it will push an update to the AP as well.
HTH,
Steve
-----------------------------------------
Please remember to rate useful posts, and mark questions as answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide