WLC 5508- Bandwidth monitoring

[Prasan Venky]

Dear All,,

Could anyone let me know whether it is possible to see how much bandwidth each client is using in WLC..? through CLI or GUI..?

Thanks in advance.

KVS

[Rasika Nayanajith]

If you configure Apllication Visibility & Control (AVC) from 7.4.x onwards you can do this.

Monitor -> Clients -> client MAC -> AVC statistics

This post will show you how to configure this feature some CLI commands to verify it

http://mrncciew.com/2013/03/28/configuring-avc-on-wlc-7-4/

HTH

Rasika

**** Pls rate all useful responses ****