03-07-2014 02:45 PM - edited 07-05-2021 12:22 AM
I have a WLC 5508 / Software version: 6.0.199.4 and today it detected all our APs as Rogue. The configuration was not changed, it just marked all our APs into the Rogue list, so the end users are not able to use the Wireless. As part of the troubleshoot I reset an AP waiting to have it back on “authorized list” but as soon as it turned up the WLC marked it as Rogue.
Any thought?
thanks you!.
03-07-2014 02:50 PM
I would suggest you upgrade to at least v7.0.250.0. That code your running is old and might be why you are seeing what you are seeing. Make sure that you don't have RLDP enabled also.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
03-07-2014 03:28 PM
Rogue Detecion Auto Discovery protocol is disable. I will go with the upgrade.
Thanks
Arturo
03-07-2014 02:52 PM
That's really weird. If there were a second WLC at the same locaiton that wasn't configured in the mobility group that can happen, but I've never seen a WLC call it's own AP rogue before.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
03-07-2014 03:07 PM
Hi, thanks for your replay back. This is the only WLC.
03-07-2014 03:04 PM
I have a WLC 5508 / Software version: 6.0.199.4
Depending on your APs used, upgrade to either 7.0.250.X or 7.4.121.X.
today it detected all our APs as Rogue.
Make sure you didn't enable auto-contain rogue APs.
03-07-2014 03:27 PM
All the Auto-contein options are disable.
I will go with the upgrade.
thanks
03-07-2014 04:30 PM
Make sure that your AP's are supported on the code you want to upgrade to.
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Also make sure you upgrade you FUS
https://supportforums.cisco.com/docs/DOC-23757
Release notes for the FUS in toward the bottom:
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide