WLC 5508 - SNMP Oid for AP Supported

Whiteire · ‎03-26-2018

Hello guys,

I'm looking for an OID to get the total of AP Supported on a Cisco WLC 5508 by using SNMP. I already found an OID returning the total AP UP but not the AP Supported (which means the maximum capacity of Aps).

Does anyone knows a way to do that ?

Thanks in advance.

Rich R · ‎03-26-2018

I believe you'll find this does the trick - sorry realised after posting that's clients not APs - so ignore below I'll see if I can find one for APs! Sorry I couldn't find one!

clsSysMaxClients This object specifies max associated clients supported per WLC. OID: 1.3.6.1.4.1.9.9.618.1.8.3
CISCO-LWAPP-SYS-MIB::clsSysMaxClients.0 = Gauge32: 20000

Regards

Rich

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

Whiteire · ‎03-26-2018

Hi rrudling,
Thanks for trying to help me ^^ Unfortunately I think there is no OID to do the trick except if someone found something we didn't see :/