08-28-2014 01:16 AM - edited 07-05-2021 01:27 AM
Hi all.
I have 2 WLC 5760 (version 3.6) in stack and 20 APs .
All APs registered on WLC but operation state in both radio is DOWN .
APs connected on different switches.
What can it be ?
Thanks
Solved! Go to Solution.
08-28-2014 05:14 AM
Yes, if it is disabled due to PoE then you need to correct that. If AP model are newer one (2700/3700) then try to power them from a POE+ switch
If you have a test AP then you can watch the console output while powering/booting. That will tells if AP radio goes down with reason.
HTH
Rasika
**** Pls rate all useful responses ****
08-28-2014 04:45 AM
Hi
Have you configured the correct country code on your 5760 ? If you check "show wireless country configured" & see the correct configuration done.
HTH
Rasika
**** Pls rate all useful responses ****
08-28-2014 05:08 AM
Hi Rasika.
County code on wlc same as on APs
wlc-1#show wireless country configured
Configured Country.............................: RU - Russian Federation
Configured Country Codes
RU - Russian Federation : 802.11a Indoor,Outdoor/ 802.11b / 802.11g
wlc-1#show ap status
AP Name Status Mode Country
-------------------------------------------------------------------------
APb838.61f3.2ed9 Enabled Local RU
APb838.61f3.2f1b Enabled Local RU
AP18e7.28bd.4ef1 Enabled Local RU
I think problem in PoE , cause APs conect to old 6509 with CatOS, but output comand show port powerinline show that all good and 15.4 W go to port.
8/73 auto on 15400 14607 13000 cisco+ieee class 3
8/74 auto on 15400 14607 13000 cisco+ieee class 4
8/75 auto on 15400 14607 13000 cisco+ieee class 3
8/76 auto on 15400 14607 13000 cisco+ieee class 3
8/77 auto on 15400 14607 13000 cisco+ieee class 3
In the output "show tech" from the ap a found this message
Radio disabled due to PoE
08-28-2014 05:14 AM
Yes, if it is disabled due to PoE then you need to correct that. If AP model are newer one (2700/3700) then try to power them from a POE+ switch
If you have a test AP then you can watch the console output while powering/booting. That will tells if AP radio goes down with reason.
HTH
Rasika
**** Pls rate all useful responses ****
08-28-2014 05:26 AM
I have 2 types of APs - 2600 and 3600.
Yes , just now connect APs to new 3850 switch and all APs go to UP .
Thanks for all .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide