WLC 9800 protocol/clients traffic

[gabelz]

HI all,

is there some way by CLI or by GUI to check in real time ,which the most used protocol ,as SSH,MS-UPDATE,Etc..(with bandwith usage) without enabling monitoring-->Application visibility?

Is the "show wireless client summary detail ipv4 " confiable from a tx/rx usage point of view?

TIA,

MG

[MHM Cisco World]

Try run snmp

MHM

[raobilal67686]

amazing

[balaji.bandi]

try netflow.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/application-visibility-and-control.html

[gabelz]

Hi all,

thanks for your responses.

SNMP and netflow are already configured,pointing to DNA,but,anyway,in the DNA there is no the possibility to be as granular as i want,for that my question.

TIA,

MG

[balaji.bandi]

If the DNAC enabled Application telemetry you can look as below depends what DNAC version and WLC code running)

https://www.youtube.com/watch?v=cdLNL3xFTYo

suggest to look recent Live presentation and video :

https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2024/pdf/BRKEWN-2667.pdf