01-24-2019 11:26 PM - edited 07-05-2021 09:44 AM
Dear All,
I need to upgrade WLC 2504 from 7.6 to 8.3 and also access points. My question is do i need to upgrade Access point as well or Access Points will automatically upgrade after upgrading the WLC.
Thanks :>)
01-24-2019 11:33 PM
yes they do, read the release notes before you upgrading to right version. Do you have high availability on WLC ?
01-24-2019 11:35 PM
01-25-2019 12:19 AM
1. Move all the AP's to join to the primary controller;
2. Upgrade the secondary controller with the firmware and the bootstrap;
3. When the secondary controller has been completely upgraded.
4. Move the 1 or 2 Test AP to new secondary controller and test all working as expected, before you move test all the AP.
5. Once confirmed all working with TEST AP, Move res all the AP's to the secondary controller;
6. Upgrade the primary controller with the firmware and the bootstrap; and
7. Have the AP's associate to their rightful WLC by doing to loadshare across WLC.
01-25-2019 03:04 AM
Hi,
Yes all AP will update their image from WLC automatically.
Just keep in mind that you cant go directly from version 7.6 to 8.3
Step1: First Upgarde from 7.6 to version 8.0.152.0 on both WLC
Step2: From version 8.0.152.0 to 8.3.143.0 on both WLC
Just follow the steps from Balaji for upgrade procedure .
Regards
Dont forget to rate helpful posts
01-31-2019 03:21 PM
Yes when you upgrade the controller it will upgrade the APs - you wont have to manually upgrade each AP, the WLC will download the new code to them.
You will need to plan for an outage, as the APs will get reloaded in the process
Suggest you to read the release notes of the release notes before the upgrade, and make sure all your APs and controller support the new version, it will tell you if you need an interim version
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide