06-02-2014 11:48 AM - edited 07-05-2021 12:56 AM
I am curious about the client load balancing feature for a Cisco WLC. Basically, if Client Load Balancing is enabled on a WLAN, will clients in that particular WLAN be balanced based on the total client count on the AP or the client count on that AP in the specified WLAN?
Thanks in advance for your responses.
Solved! Go to Solution.
06-03-2014 12:05 AM
Check this about Load balancing:
https://supportforums.cisco.com/document/81896/load-balancing-and-band-select-cisco-wireless-lan-controller
Using Aggressive load balancing the LAP can be configured to load balance clients among AP on a per WLAN basis.
http://www.cisco.com/image/gif/paws/113160/aggressive-load-balancing-clients-00.pdf
Regards
Dont forget to rate helpful posts
06-03-2014 12:05 AM
Check this about Load balancing:
https://supportforums.cisco.com/document/81896/load-balancing-and-band-select-cisco-wireless-lan-controller
Using Aggressive load balancing the LAP can be configured to load balance clients among AP on a per WLAN basis.
http://www.cisco.com/image/gif/paws/113160/aggressive-load-balancing-clients-00.pdf
Regards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide