cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
996
Views
1
Helpful
2
Replies

WLC client wireless connection unavailable

CCC3
Level 5
Level 5

WLC: 3504 (8.10.171.0)

AP: 9115AXI

security : PSK

Flexconnect

Wireless cannot be connected.

Debug Client Results

You can see the following.

Client deletion code: default reason code for all client deletion requests

Cause: Error while configuring PMIPv6 MAG/ Error while creating data plane rules for client/ Error while redirection URL exists and Radius NAC with mac filtering is set, pending for posture/ no dot1x control block found for client, internal error/ client did not respond to retries for SA queries (802.11w)/ Default for flex local authentication client/ No client ACL in AP

WLC/AP is sending a connection response to the client with status code 12 = Unknown or invalid SSID

Is there anyone who knows?

If necessary, the entire debug log can also be delivered.

2 Replies 2

Mark Elsen
Hall of Fame
Hall of Fame

 

 - As per https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html   upgrade to 8.10.196.0 first and check again , especially and also because a modern 9115AXI is in use here!

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

Rich R
VIP
VIP

Show the full configuration of the WLAN: 
config paging disable
show wlan <WLAN ID>

 

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
Review Cisco Networking for a $25 gift card