WLC domain user authentication

[jong_r0602]

Hi Guru's

Im having a problem in configuring my WLC domain users. I have ACS v3.3 and WLC 4112.

I followed this instruction but still i keep on authenticating whenever i tried to connect my Laptop to certain SSID. And also, the windows login prompt me only once. Please help me

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00801df0e4.shtml#manual

thanks.

[SHANNON WYATT]

Yes, if you are using the Microsoft Zero Config client you need to select the option to authenticate as a computer as available. You should see in your logs either a pass or fail as "host\computername".

If you are using another client (Intel, Cisco, etc), you may or may not be able to make this work. I know on the Intel you can make a persistent connection.

[jong_r0602]

Hi,

I tried and it said "Machinea authentication is not permitted". What action should i need to do next?

Thanks,

Jong

[SHANNON WYATT · Accepted solution]

What said "Machine Authentication is not permited"?

Make sure that ACS has it enabled:

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00801df0e4.shtml

[jong_r0602]

Yes, I thinks this will work. I'll let you know once I implemented the config.

Good document!

Thanks,

Jong

[jong_r0602]

Thanks so much for helping me.

Regards,

Jong