08-02-2013 01:31 AM - edited 07-04-2021 12:34 AM
Hello,
I would like to configure on a WLC 2504 Internet-Access for Guests through a web authentication.
But I always find configuration instructions only describe the with the additional anchor WLC?
This works but also without anchor WLC, right?
Can anyone give a hint on where I find a manual for it (ideal for Release 7.4 or 7.5) to me.
Thank you
Alexander
08-02-2013 06:16 AM
Yes it will work.
You just need to define the L3 security as webauth in the WLAN.
Steve
Sent from Cisco Technical Support iPhone App
08-02-2013 09:37 AM
Should be fairly straight forward in the configuration guide below:
Anchors are only typically needed in a DMZ environment if you want to segregate your guest traffic from your internal network.
08-02-2013 09:51 AM
It does indeed. When I use the foreign controller for guest access, I often will use a 5508 in port mode (non lag) and break out a port for guest.
__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide