05-15-2017 08:41 PM - edited 07-05-2021 07:02 AM
Hi,
We've generated CSR on our 5520 (8.3.112) for wildcard certificate. We had a power interruption and after the reboot GUI is no longer accessible. According to the document that's how it is supposed to be.
Now I've seen a bug with bug ID CSCvc10206, with a workaround of executing the following commands:
config certificate generate webadmin
config certificate generate webauth
So my question is, how will these commands affect the signed certificate that I will upload to the controller as these commands will generate new web certs? Will the WLC still accept the signed cert to be uploaded?
Thanks,
Solved! Go to Solution.
05-16-2017 12:06 AM
Well, you can always generate new certificates at any moment, it replaces the existing one. That's also the case with the signed one. You can always upload the signed one, which will replace the self-generated cert. See for instructions:
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
05-16-2017 12:06 AM
Well, you can always generate new certificates at any moment, it replaces the existing one. That's also the case with the signed one. You can always upload the signed one, which will replace the self-generated cert. See for instructions:
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
05-16-2017 05:20 PM
Thanks a lot Chris!
Cheers!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: