wlc local EAP Help

[alessandro.dona]

Hi guys,

i need to set ip my wlc as a local eap authenticator.

I create a new Wlan(test1) ad associated yo a dynamic interface.

layer 2 security--->wpa+wpa2+auth(802.1x)

aa server-->local eap

I created a local-eap profile where i checked PEAP

I create a local-database user

My wireless-pc card pc was not able to work.

did i miss any step?

thx..

Ale.

[amritpatek]

Follow the steps in order to configure the devices for EAP authentication :

1. Configure the WLC for basic operation and register the Lightweight APs to the controller.

2. Configure the WLC for RADIUS authentication through an external RADIUS server.

3. Configure the WLAN parameters.

4. Configure Cisco Secure ACS as the external RADIUS server and create a user database for authenticating clients.

For the further details for configuration follow the URL It will help you :

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665d18.shtml