03-23-2018 12:14 PM - edited 07-05-2021 08:25 AM
Hi,
I am having one problem on my WLC, AP not join and i can see logs that error.
*osapiBsnTimer: Jan 03 01:00:45.415: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2202 Failed to complete DTLS handshake with peer
Can someone help me?
thanks
Solved! Go to Solution.
04-04-2018 01:32 PM
sorry guys i solved my issue with that command line. via ssh in my AP
capwap ap primary-base "name WLC - IP WLC"
thanks
03-23-2018 04:26 PM
@damianpablo wrote:
Jan 03 01:00:45.415:
Look at the time & date of the controller.
AP won't join a controller if the time and date is incorrect. Synchronize the WLC with an NTP (don't manually set the time and date).
If the AP still won't join, console into the AP and reboot the AP. Post the entire boot-up process because we want to see what the AP is doing.
Please provide the important output to the following commands:
1. WLC: sh sysinfo; and
2. WLC: sh time;
03-26-2018 07:55 AM
hi
i paste output config. I have restarted my AP and not connected to WLC
Time............................................. Wed Jan 5 20:46:23 2000
Timezone delta................................... 0:0
Timezone location................................
NTP Servers
NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server NTP Msg Auth Status
------- ---------------------------------------------------------------
1 0 192.168.4.254 AUTH DISABLED
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.220.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 1.0.0
Firmware Version................................. PIC 16.0
Build Type....................................... DATA + WPS
System Name...................................... LMRDLS-WLC00
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 10.20.4.254
Last Reset....................................... Power on reset
System Up Time................................... 4 days 20 hrs 45 mins 26 secs
System Timezone Location.........................
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
03-26-2018 08:35 AM
Did you accept the EULA?
Thanks,
Tarun
03-26-2018 10:35 AM
yeah i accepted EULA
03-26-2018 12:16 PM
@damianpablo wrote:
System Timezone Location.........................
WLC Timezone is a blank. What timezone is this controller in?
Post the complete output to the AP command "sh version".
03-26-2018 12:19 PM
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 15.3(3)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Thu 19-Feb-15 11:19 by prod_rel_team
ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA6, RELEASE SOFTWARE (fc1)
AP-CPD-RDLS uptime is 29 minutes
System returned to ROM by reload
System image file is "flash:/c1140-k9w8-mx.153-3.JA3/c1140-k9w8-xx.153-3.JA3"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco AIR-LAP1141N-A-K9 (PowerPC405ex) processor (revision B0) with 98294K/32768K bytes of memory.
Processor board ID FTX1730E01J
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from reload
LWAPP image version 8.0.115.0
1 Gigabit Ethernet interface
1 802.11 Radio
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 4C:00:82:BF:4E:CE
Part Number : 73-12836-06
PCA Assembly Number : 800-33767-06
PCA Revision Number : A0
PCB Serial Number : FOC17274EC2
Top Assembly Part Number : 800-33776-05
Top Assembly Serial Number : FTX1730E01J
Top Revision Number : A0
Product/Model Number : AIR-LAP1141N-A-K9
Configuration register is 0xF
03-26-2018 12:24 PM
03-26-2018 12:29 PM
(Cisco Controller) >show time
Time............................................. Mon Mar 26 13:28:31 2018
Timezone delta................................... 0:0
Timezone location................................ (GMT -3:00) Buenos Aires (Agen tina)
NTP Servers
NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server NTP Msg Auth Status
------- ---------------------------------------------------------------
1 0 192.168.4.254 AUTH DISABLED
03-26-2018 12:30 PM
04-04-2018 01:32 PM
sorry guys i solved my issue with that command line. via ssh in my AP
capwap ap primary-base "name WLC - IP WLC"
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide