WLC remove trunk config

[afsharki2]

Hello, I might be asking the wrong question here because I know nothing of the WLC.

I am using a 5500 Series Wireless LAN Controller.  I have a switch connected to the wlc in which I would like to remove a vlan that is not in use anymore.  I have done this on the switch end port-channel, but how do I do this on the WLC end?  Do WLCs even use port-channels?

Thank you

[Rasika Nayanajith · Accepted solution]

only thing you have to do on WLC end is remove dynamic interface created on those specific vlans that you do not require any longer on WLC

HTH

Rasika

*** Pls rate all useful responses ***

[afsharki2]

Got it.  And I find those vlans by doing a "sh int summary" ?

[Rasika Nayanajith]

YES